Addressable micro-processed central unit manufactured by AGUILERA ELECTRONICA, according to the EN 54-18 norm, which manages the information of two digital inputs.

Suitable for the personalization of two groups, for defining their location and the status changes in each one of them. It allows the independent control on each input, whileits contacts are selectable, normally open or normally closed.

It has the same characteristics, as the AE/SA-8E model.

Addressable micro-processed unit manufactured by Aguilera Electronica,according to the EN 54-18 norm, which controls the state of 2 inputs: activation,short line and open line.

Its main use is the monitoring of alarm systems (Type 1) as specified in the UNE EN54-13 norm: Compatibility assessment of the components of the system.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICA according to EN 54-18 norm, which operates two outputs via relay free of voltage: NCcontacts (closed contacts) & NA (common and open contacts)

Special for carrying out two independent manoeuvres (closing fire doors, turn on or off electrovalves, etc.). Equipped with self-isolating material, isolated from the rest of the installation.

in caseof short circuit in its interior.

• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Consumption at rest/alarm: 2.6 mA.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICAaccording to the EN 54-18:2003 norm, which manages the information from eight digital entries.

With capacity for the personalization of up to eight groups, to identify their location and to inform about the changes of status generated in each one of them. Each input canbe selected for open or closed contact.

• Equipped with self-isolating material, isolating it from the rest of the installation incase of short circuit in its interior.
• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Power consumption: 1.1 mA at rest and 1,3 mA with all eight entries activated.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Unit manufactured by AGUILERA ELECTRONICA, according to the EN 54-17:2004 norm.

Micro-processed unit which is inserted in a loop of the algorithmic system, each max. 30 devices, determined by the EN 54-14 norm, creating sectors.

Its function is to control the current, which is circulating by the loop and if this increases,exceeding the parameters that it has programmed, it opens the line, isolating the restof the loop so that this continues functioning.

When the malfunction disappears, then it is reset automatically by going back to normal functioning.

• Bi-directional power control.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICA that controls one loop with detectors, push buttons or other conventional equipment.It has a supervised output relay for triggering an evacuation manoeuvre in compliancewith installation standard: EN 54-14. It is specific for controlling detector’s areas orconventional push buttons in areas where intelligent detectors are not installed.

• Supports auxiliary power for the loop devices.
• Equipped with self-isolating material isolating it from the rest of the installation.

in caseof short circuit in its interior.

• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Maximum power consumption: 900 μA.
• Maximum power consumption by auxiliary power loop: 44 mA.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICA that controls one loop with detectors, push buttons or other conventional equipment.It has a supervised output relay for triggering an evacuation manoeuvre in compliancewith installation standard: EN 54-14. It is specific for controlling detector’s areas orconventional push buttons in areas where intelligent detectors are not installed.

• Supports auxiliary power for the loop devices.
• Equipped with self-isolating material isolating it from the rest of the installation
  in caseof short circuit in its interior.
• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Maximum power consumption: 900 μA.
• Maximum power consumption by auxiliary power loop: 44 mA.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICA that controls one loop with detectors, push buttons or other conventional equipment.It has a supervised output relay for triggering an evacuation manoeuvre in compliancewith installation standard: EN 54-14. It is specific for controlling detector’s areas orconventional push buttons in areas where intelligent detectors are not installed.

• Supports auxiliary power for the loop devices.
• Equipped with self-isolating material isolating it from the rest of the installation in caseof short circuit in its interior.
• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Maximum power consumption: 900 μA.
• Maximum power consumption by auxiliary power loop: 44 mA.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICA,according to the EN 54-18 norm, which manages an output with potential- free relayto activate a manoeuvre and an entry that confirms that this has been carried out. Ifthe operation could not be confirmed at a scheduled time, then the central panel willindicate this situation in its presentation. Ideal to function upon control valves, lockgates and fire doors, when confirmation is needed that the manoeuvre was performed.

• Equipped with self-isolating material that isolates it from the rest of the installation,in case of short circuit in its interior.
• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Consumption at rest/alarm: 1.5 mA.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.

Addressable micro-processed unit manufactured by AGUILERA ELECTRONICA,according to the EN 54-18 norm, which manages an output with potential- free relayto activate a manoeuvre and an entry that confirms that this has been carried out. Ifthe operation could not be confirmed at a scheduled time, then the central panel willindicate this situation in its presentation. Ideal to function upon control valves, lockgates and fire doors, when confirmation is needed that the manoeuvre was performed.

• Equipped with self-isolating material that isolates it from the rest of the installation,in case of short circuit in its interior.
• Connection to 2 wires with removable terminals.
• Power: between 18 and 27 V CC.
• Consumption at rest/alarm: 1.5 mA.
• Mounted in an ABS cabinet of 105 x 82 x 25mm.