High pressure bottles, manufactured out of thermally treated alloyed steel, withoutwelding (according to the European directive 84/525/EEC). Working pressure of 42bars, pressure test of 250 bars, serving temperature of -20 °C to + 50 °C, engravedand painted in red colour (RAL 3002).
Equipped with:
Main valve made out of forged brass with a piston and an axle in stainless steel,without welding, equipped with disk security. CE marked according to RD: 769/1999.
Relief valve to prevent a shot, in the event of leakages.
Fixation by iron fittings.
Siphon tubes.
Solenoid for triggering (powered at 24 V and with 500 mA of consumption).
Gauge
Flange and protective hood of the valve and its accessories.
High pressure bottles, made out of thermally treated alloyed steel, without welding (according to the MIE AP7 instruction about equipment under pressure and the84/525/CEE European directive). Working pressure of 60 bars, test pressure of 250bars, serving temperature of -20ºC to +50ºC, engraved and painted in red colour (RAL3002).
Equipped with:
Main valve, manufactured out of forged brass with a piston and an axle in stainless steel, they have a security disc and a relief valve to avoid triggering in case of smallspills.
Siphon tubes.
Solenoid for triggering (Powered at 24 V and with 500 mA of consumption).
Micro-processed equipment of continuous weighing, where the weight of each bottleis individually controlled by an Analogue Device. Mod.AEX/CPC.
Programmable unitthat detects the weight loss from 200 grams on, formed basically by: electronic cell,microprocessor and digital display reflecting the weight permanently. They are supplied with tensor, which allows raising the bottle easily, connectors with hoses assembledfor its connection and rest of
complements.
Assembled in special metallic frame for continuous weighing, a discharge collector with a coupling thread, to the installation and a decompression valve.
Observations:
A. The 80L and 120L bottles are supplied with a AE-250 valve of 2 1/2”.
Equipped withiron fittings for its fastening, flange and metallic hood for protecting during the transportation, both the valve and its accessories.
The bottles of 67, 40.2 and 26.8 L are supplied with the AE-160 valve of 1 1/2”.
The bottles of 13.4, 6.7 and 4.7L are supplied with the AE-100 valve of 1”.
B. Each bottle has the corresponding certificates issued by the Ministry of Industry andthey are available at the disposition of our customers in our archives.
AE/CPCA Adapter for continuous weighing
AEX/LE Hose for entry with connector
AEX/LU Hose of union between equipment with connectors
AEX/LUBP Hose of union for pilot small bottle with weighing
AEX/LFL2 End-of-line connector
BPAS1 Subjection arc to the flange of the bottle of 4,7 to 67L
BPAS80-1 Subjection arc to the flange of the bottle of 80 to 140L
L34 Autonomous HFC hose of 4.7 at 13.4 L (with or without weighing)
L114N Hose for HFC rows & autonomous rows from 26.8L to 67L
L112N Hose for HFC rows & autonomous rows from 80 to 140L
LD18 Triggering hose for rows of 67 and 80L
LD18-500 Triggering hose for rows 120 L and 140L
LD18BP Triggering hose for pilot small bottle
LD18BPP Triggering hose for pilot small bottle with weighing
LDR18 Hose of directional valve with backstop
H274 Fittings for bottles of 4.7 to 13.4 L
H364 Fittings for bottles of 26,8 to 40,2 L
H402 Fittings for bottles of 67 and 80 L
H120 Fittings for bottles of 120 and 140 L
HP274 Iron fittings for pilot small bottle
V-CA Hood for the protection of bottles of 4.7 to 67 L
V-CA212 Hood for the protection of bottles 80,120 and 140L
BRW80-1 Flange for fixing the hood of the bottles of 4.7 to 13,4 L
BRR112-1 Flange for fixing the hood of bottles of 26.8 to 67 L
BRR212 Flange for fixing the hood of bottles of 80 to 140 L
AEX/BP Pilot small bottle of triggering of 5 L loaded with CO2 (without weighing)
AEX/BPP Pilot triggering small bottle of 5 L loaded with CO2 (with weighing)
AEX/VCODR34 Directional valve of 3/4”
AEX/VCODR1 Directional valve of 1”
AEX/VCODR114 Directional valve of 1 1/4”
AEX/VCODR112 Directional valve of 1 1/2”
AEX/VCODR212 Directional valve of 2 1/2”
AEX/VCODR3 Directional valve of 3”
AEX/VCODR4 Directional valve of 4”
AEX/SDR2 Triggering system for 2 directional valves
AEX/SDR3 Triggering system for 3 directional valves
High-pressure rows formed by bottles of 67, 80 and 120L of capacity each one of them, manufactured in thermally treated steel, without welding (according to European Directive84/525/EEC). Working pressure of 42 bars, test pressure of 250 bars, serving temperature from -20 °C to + 50 °C, engraved and painted in red colour.
Equipped with:
Main valve with pneumatic opening through the head.
Backstop valves.
Manometer
Hoses for pneumatic activation of triggering and hoses for discharge.- Assembled in metal frame double crossbar for fixation and collector of discharge,with coupling flange to the installation and a decompression valve.
The frames are manufactured for the assembly of bottles, in one or two rows, only for bottles of 67L
Observations:
A. Up to 9 bottles, the pneumatic triggering of the battery takes place by converting one of the bottles into a pilot bottle, for which its solenoid valve is equipped withautomatic triggering and for manual triggering, a lever.
B. From 10 bottles on, the rows come equipped with a pilot triggering small bottle,consisting of a 5 L bottle charged with CO2, filled with a main valve of 1″, solenoid at24V for the automatic triggering and a lever for the manual triggering.
C. The amount of the triggering systems, described in point A and B, have been included in the price of the batteries.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
