Referencia: AE/V-PB2

Hold manual call point

Push button designed according to EN12094-3 norm, in order to block the ignition of a system of extinction, in blue color, for interior use, serigraphically printed with thetext: HOLD.
Equipped with: Micro-switch, verification, test system with reset key, transparent methacrylate protection cover, normally open contacts (NO), common C, normallyclosed (NC) contacts and calibrated plastic sheet, so that it locks and does not break.

Introduced in an ABS box of 98X98X50 mm.

Referencia: AE/V-PD2

Release manual call point

Manual call point designed according to EN12094-3 norm, to trigger the ignition of anextinguishing system, in yellow colour, for interior use, serigraphically printed with thetext: RELEASE.

Equipped with: Micro-switch, verification test system with reset key, transparent methacrylate protection cover, normally open contacts (NO), common C, normallyclosed (NC) contacts and calibrated plastic sheet, so that it locks and does not break.

Introduced in an ABS box of 98X98X50 mm”

Referencia: AE/V-PE

Emergency manual call point

Evacuation manual call point, designed for its installation in emergency exits.
Greencolor. Interior use.

Equipped with: Microswitch, verification, test system with reset key, transparent methacrylate protection cover, normally open contacts (NO), common C, normallyclosed (NC) contacts and calibrated plastic sheet, so that it locks and does not break.

Introduced in an ABS box of 98X98X50 mm

Referencia: AE/V-PSAT

Manual call point with self-test

Developed and manufactured by Aguilera Electronica under EN 54-11 norm.

Equipped with: micro-switch, alarm LED with a self-test LED, verification system with reset key, calibrated plastic sheet, so that it locks and it will not break.

  • Push button protective cap.
  • Mounted in an ABS case.
  • CE Certificate issued by LPCB.
  • Dimensions: 98 X 95X 39 mm
Referencia: AE/V-PSIP

Outdoor manual call point

Conventional alarm manual call point suitable for outdoor use, IP65 according to EN 54-11 norm.

Equipped with a microswitch, with a load resistance of 470 ohms or 680ohms, verification system with reset key and LED signal alarm.

Allows the assembly of a calibrated plastic sheet, so that it locks and will not break, or of a breakable glasssheet, supplied both of them.

ABS case of 85x85x58 mm. CE certificate according to DPC. LPCB certificate.
Protection: IP 65

Referencia: AE/V-PSIP67

Outdoor IP67 manual call point

Conventional alarm manual call point, water resistant with an IP67 protection, certified according to EN54-11 norm. It has two independent switches with voltage free contacts,valid for connecting the switch to conventional or algorithmic systems through the corresponding module. In its interior it can accommodate the miniature module of 1 input. It incorporates calibrated plastic sheet, so that it locks and does not break, averification system with a reset key and a visible image of alarm, confirming its activation.

  • Dimensions: 119mm x128mm x 62mm
  • Operating temperature: – 20ºC to + 65ºC