Manufactured in AISI 304 stainless steel and designed for a working pressure of 280bar. In the open diffusers, the discharge is produced directly, when the water reaches them. This diffuser is suitable for the wet systems or as a pre-action.
The flow of the diffusers is depending on the model of the nozzle and their number and the flow can be selected from 0.6 L/min up to 36 L/min, with a pressure of 120 bar.
All the diffusers for fixed installations have the same thread and the same system of sealing. For the fixation of the diffuser to the tube, an adapter is used between the accessory of the tube and the diffuser.
Open nebulizer head for the installation in dry piping, made out of AISI 304 stainless steel special for high pressure, with the nozzles mounted at 90º, 120° or 160º and a rangeof flow rates sufficient to cover a wide range of risks.
| 4 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA120T4 | de 1,6 a 20,4 |
| AN/CA90T4 | de 1,6 a 20,4 |
| 5 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA120T5 | de 2,0 a 25,5 |
| AN/CA90T5 | de 2,0 a 25,5 |
| 7 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA120T7 | de 2,8 a 35,7 |
| AN/CA90T7 | de 2,8 a 35,7 |
Open nebulizer head for the installation in dry pipe, manufactured in AISI304 stainlesssteel for high pressure, equipped with 3 or 5 nozzles in line, in an angle of 180º.
| 3 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA180T3 | de 1,2 a 15,3 |
| 5 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA180T5 | de 2,0 a 25,5 |
| 4 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA360T4 | de 1,6 a 20,4 |
| 6 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CA360T6 | de 2,4 a 30,6 |
| 3 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CAP90T3 | de 1,2 a 15,3 |
| AN/CAP120T3 | de 1,2 a 15,3 |
| 4 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CAP90T4 | de 1,6 a 20,4 |
| AN/CAP120T4 | de 1,6 a 20,4 |
| 5 NOZZLES |
| REFERENCE | FLOW (L/min) |
| AN/CAP90T5 | de 2 a 25,5 |
| AN/CAP120T5 | de 2 a 25,5 |
Open nebulizer head for the installation in dry piping, manufactured in AISI304 stainlesssteel, for high pressure, equipped with 1 nozzle at an ideal diameter for kitchens,motors and special points.
| REFERENCE | FLOW (L/min) |
| AN/CA1T | de 0,4 a 5,1 |
