Manufactured in AISI 304 stainless steel and designed for a working pressure of 280bar. In the closed diffusers, a discharge is only produced when the shutter bulb (fuse ) reaches the temperature that it was calibrated for. This diffuser is suitable for the wetsystems or as a preaction.
The flow of the diffusers is depending on the model of the nozzle and their numberand the flow can be selected from 0.6 L/min up to 36 L/min, with a pressure of 120bar.
All the diffusers for fixed installations have the same thread and the same system of sealing. For the fixation of the diffuser to the tube, an adapter is used between the accessory of the tube and the diffuser.
Closed nebulizer head with thermal bulb (fuse) that breaks at 57º and opens thenozzles, manufactured in AISI304 stainless steel, for its installation in high pressurewet tubes. They are equipped with 5 or 7 nozzles mounted in an opening angle of 90ºor 120° and a range of flow volumes sufficient to cover a wide range of needs.(Ask if the opening at other temperatures is needed).
| 5 NOZZLES | |
| REFERENCE | FLOW(L/min) |
| AN/CC90T5 | de 2 a 25,5 |
| AN/CC120T5 | de 2 a 25,5 |
| 7 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CC120T7 | de 2,8 a 35,7 |
| 3 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CC180T3 | de 1,2 a 15,3 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CC180T5 | de 2,0 a 25,5 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CCP120T5 | de 2 a 25,5 |