Pumping equipment consisting of volumetric type electro pumps of ceramic pistons of a 40 L/min flow, pressure of 140 bar and a three-phase electric engine of 230/400V and 15 C.V (11.04 kw) each one of them, plus a centrifugal pump of stainless steel of 24 m3/h flow and 2 HP power, enough for the supply of 10 pumps. The pressure of feeding will be ensured by this feeding pump at 4 bar. The equipment is completed with a jockey pump with flow volume of 2.6 l/min regulated at a pressure between 30and 40 bar, with a 2 HP- 380 V three-phase electric motor. The electric control cabinetthat regulates the correct functioning of the equipment is designed according to the UNE 23500 norm and allows the emission of alarms at a distance.

The equipment consists of a pump controlled by a frequency variator and the others are controlled through soft starters. It is delivered assembled over a universal workbench, regulated according to the work pressure, depending on the project and its correct functioninghas been verified.

The pumping equipment is delivered with:

• Flexible high-pressure hose for the pumping, of 1½” and of 600 mm in length. Swivel connection, male thread size BSP 1½”.
• Aspiration hose of low pressure, of 2″ and 600 mm in length. Male thread connection size BSP 2″.
• Return collector of 3″ with flange connection DIN 2632/33.