Low pressure bottles, made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -10ºC to +60ºC. Engraving and painting according to the regulations.
Equipped with:
- Main valve, made in forged brass with stainless steel piston and shaft without welding. Provided with safety disk. Ball valve for opening/shutting the output with monitoring of a state (usually open/common).
- Gauge incorporated.
- Two outputs for Aedetec sensor tube incorporated.
- Trip solenoid (power supply 24V and consumption of 500mA).
- Attachment fitting.
- Flange and protection cap.
- 1 Sensor tube outlet.
| REFERENCE | CAP.(L) | MAX.LOAD(Kg) | DIMENSIONS | LOAD(Kg) |
| AEX/ADTDL4 | 4,7 | 5,7 | 0,24×0,14×0,50 | 8,6 |
| AEX/ADTDL6 | 6,7 | 7,7 | 0,24×0,14×0,65 | 10,3 |
| AEX/ADTDL13 | 13,4 | 15,4 | 0,24×0,14×1,15 | 15,5 |
| AEX/ADTDL26 | 26,8 | 30,8 | 0,33×0,23×1,02 | 48 |
| AEX/ADTDL40 | 40,2 | 46,2 | 0,33×0,23×1,32 | 52 |
