External temperature sensor for the compensatory temperature. For levels above 200ºC it can be used a special version following the instructions from the manufacturer.

This module manages the individual alarms and the previous signals “Diff” and “Max” available by relay contacts. The relays can be programmed by a configuration’s software “ADW Config”.
Characteristics:
• Supply tension: 5 Vcc
• Max. Relay output load: 50 / 1 / 30 V DC/A/W
• Dimensions: 95x58x17mm

ADW configuration-test

AECL-SW1. 1ADW control software
AECL-SW40. ADWNetSoft-40
AECL-SW100. ADWNetSoft-100
AECL-SW250. ADWNetSoft-250

Copper tube with external diameter: 5 mm, internal diameter: 4 mm and length: 5.5 m

Flexible tube to connect the ADW unit and the copper tube.

• External diameter: 5 mm
• Internal diameter: 3 mm
• Length: 1 m

AECL-TSL. Copper spiral tube with length of 5.5 m.

Stainless steel coil exact sensor element 5m TU 5/4 St.

AECL-TSS. Copper spiral tube with length of 10m TU 5/4 Cu.

Tube out of teflon. It includes special brackets for mounting tubes, connector and endcap.

• Shipping Units: 100 meters, other sizes via “”special cut””
• Distance between each bracket:0.5 m
• External diameter: 6 mm• Internal diameter: 4 mm
• Length: 1 m

Teflon tube. Includes special clamps for tube assembly, connector and end cap.
Shipping units: 25/100 meters, other dimensions with “special cut”
• Distance between each clamp: 0,5 m
• External diameter: 6 mm
• Internal diameter: 4 mm
• Length: 1 m

AECL-XA5. Connection of copper-steel, 5 mm

Copper clamp to be mounted on the sensor tube. Suitable for tubes of a 5 mm diameter.

Brass double clamp to be mounted on the sensor tube, suitable for tubes of a 5 mm diameter.