Increased security alarm button resistant to an explosion. Suitable for installations in hazardous areas.
Intrinsically safe alarm button for indoors, suitable for installations in hazardous
areas.
Adjustable stainless steel support.
Unit for testing the range of flame detectors ( UV, UV / IR,UV / IR ², IR³, IR ²,IR). This test unit has been designed to generate a wide range of signals of optical output.
Portable equipment with NiCd rechargeable battery. Selection of the type of optical output wanted (constant, intermittent lighting, flickering similar to flames). Lead time between tests is 30 seconds. Range 3 metres. Tests in intrinsically safe areas can be carried out (consult the manual for this application).
Single-channel galvanic isolator (AE/IS-ZG )
Compatible with intrinsically safe equipments of the IS series.
Classified II1G EEXia IIC (T4) in BASEEFA: BAS 98 ATEX 7343.
Voltage Vo 25.2 V, Current Io 93 mA, Power Po 585 mW.
Double-channel galvanic isolator (AE/IS-Z).
AE/IS-ZG. Galvanic isolators 1 detection zone
Single-channel galvanic isolator (AE/IS-ZG )
Compatible with intrinsically safe equipments of the IS series.
Classified II1G EEXia IIC (T4) in BASEEFA: BAS 98 ATEX 7343.
Voltage Vo 25.2 V, Current Io 93 mA, Power Po 585 mW.
Double-channel galvanic isolator (AE/IS-Z).
AE/IS-ZS. Galvanic isolators sirens/focus
Single-channel galvanic isolator (AE/IS-ZG )
Compatible with intrinsically safe equipments of the IS series.
Classified II1G EEXia IIC (T4) in BASEEFA: BAS 98 ATEX 7343.
Voltage Vo 25.2 V, Current Io 93 mA, Power Po 585 mW.
Double-channel galvanic isolator (AE/IS-Z).
Dual infrared flame detector, mounted in zinc alloy casing. Its micro-processor technology allows it to work with different levels of flame intensity and operates normally under adverse conditions. The detector sensitivity can be adjusted in accordance with the EN 54-10 regulation.
Dual infrared flame detector mounted in flameproof casing Its micro-processor technology allows it to work with different levels of flame intensity and operates normally under adverse conditions. The detector sensitivity can be adjusted in accordance with EN54-10.
IR³ flame detector with fire-resistant cover. Highly sensitive micro-processor which allows it to operate through smoke, oil, dust or water vapour. Sensitivity adjustable according to the EN54-10.
IR³ flame detector with fire-resistant cover. Highly sensitive micro-processormwhich allows it to operate through smoke, oil, dust or water vapour. Sensitivity adjustable according to the EN54-10.
Responds to a wave length ranging from 0.75 to 2.7μm emitted by all type of fire. Detects non-visible gas fires such as hydrogen gas fires. IR³ detectors.
Allows to discriminate between flames and false radiation sources of the IR, as the combination of filters and signal processing prevents from false alarms.
Flame detector with double technology infrared sensors (IR) and ultraviolet (UV: 185 a 260 nm). Detection cone 90º and detention distance up to 45 metres. Low consumption (8mA). A relay output is incorporated. Programmable sensitivity. Filters and analysis through micro-processor for false alarm elimination.
Flame detector with double technology infrared sensors (IR) and ultraviolet (UV: 185 a 260 nm). Detection cone 90º and detention distance up to 45 metres.
Socket for intrinsic detectors that allows the exchange of the two previous smoke detectors.
Low profile, intrinsically safe, optical smoke detector.
Classified II 1G EXia IIC (T5) (T4) in BASEEFA.
Certificates CE and LPCB, according to EN54-7 norm.
Low profile, intrinsically safe, optical heat detector.
Classified II 1G EXia IIC (T5) (T4) in BASEEFA.
Certificates CE and LPCB, according to EN 54-7 norm.
Intrinsically secure low profile heat detector.
Classified as II 1G EXia IIC (T5) (T4) in BASEEFA.
It meets the En54-7 norm, thermal class A1R.
CE and LPCB certificates, according to EN54-7.
