Archivos

Referencia: AE/DOM-OP

Optical smoke detector with battery at 9 Vcc

Detector powered with a 9 V CC alkaline battery included.

  • Optical smoke sensor, particularly effective in slow fires with and without flame.
  • Audible indication of alarm > 85dB at 3 meters.
  • Luminous indication of alarm.
  • Manual test button of operations.
  • Fault signal in case of dirt or damage to the sensor.
  • Size: diameter: 102 mm, height: 40 mm.
  • They meet the requirements of the EN14604 norm and are produced according to theISO9001:2000procedures.
  • Adaptable to the socket surface AE/C5-ZA.

Manuales

Fichas Técnicas

Catálogos

Referencia: AE/DOM-OP12

Optical smoke detector at 12V with a relay

Detector powered at 12 Vdc. Equipped with a normally open relay output.

  • Optical smoke sensor, particularly effective in slow fires with and without flame.
  • Audible indication of alarm > 85dB at 3 meters.
  • Luminous indication of alarm.
  • Manual test button for operations.
  • Fault signal in case of dirt or damage to the sensor.
  • Size: diameter: 102 mm, height:40 mm.
  • They meet the requirements of the EN14604 norm and manufactured according to theISO9001:2000 procedures.
  • Adaptable to the socket surface AE/C5-ZA.

Manuales

Fichas Técnicas

Catálogos

Referencia: AE/DOM-OP230B

Optical smoke detector at 230V AC with a relay-battery

Detector powered at 230 V AC, equipped with an included 9 VDC alkaline battery anda relay output normally open.

  • Optical smoke sensor, particularly effective in slow fires with and without flame.
  • Audibleindication of alarm > 85dB at 3 meters.
  • Luminous indication of alarm.
  • Manual test button of operations.
  • Fault signal in caseof dirt or damage to the sensor.
  • Size: diameter: 102 mm, height: 40 mm.
  • They meet the requirements of the EN14604 norm and are produced according toprocedures ISO9001:2000.
  • Adaptable to the socket surface AE/C5-ZA.

Manuales

Fichas Técnicas

Catálogos

Referencia: AE/OP-115T

Smoke detector at 115Vca

Optical smoke detector provides inputs into alternating (AC) power (230 mAor 115V AC depending on model) and in continuous current 24V or 48V CC.

Equipped with sound and light indicators, relay with voltage free outputs for switching voltages and reset input by tension (range between 24 to 48 V DC) to reset the detector.

Assembled in an ABS cabinet of 165 mm Ø x 45 mm.

Catálogos

Referencia: AE/OP-230T

Smoke detector at 230 V

Optical smoke detector provides inputs into alternating (AC) power (230 mAor 115V AC depending on model) and in continuous current 24V or 48V CC.

Equipped with sound and light indicators, relay with voltage free outputs for switching voltages and reset input by tension (range between 24 to 48 V DC) to reset the detector.

Assembled in an ABS cabinet of 165 mm Ø x 45 mm.

Manuales

Fichas Técnicas

Catálogos