Thermovelocimetric temperature detector, working depending upon changes in gas pressure, as a function of temperature. It permits the detection of differential temperature changes, from a programmed level of temperature.
The system consists of a copper sensor tube, stainless steel or Teflon (depending on the environmental conditions) of up to 130 meters long and its corresponding detector.
The detector includes: a pump that increases the pressure in the sensor tube, an electronic sensor that continuously measures the absolute pressure inside the tube and a microprocessor that performs the evaluation of data and activates the alarm, it filters the disturbing factors, such as climatic temperature variations and it detects anydamage that may arise in the sensor tube.
Characteristics:
- Supply voltage: 9 at 30 Vdc
- Range of environmental temperature: – 20 ºC to +70 ºC
- Range of temperature for sensor tube: -40 ºC to +300 ºC
- Dimensions: 134 x 250.5 x 160.5 mm.
- Level of protection of the cabinet: IP65• Weight: 1.6 Kg
Thermovelocimetric temperature detector, working depending upon changes in gas pressure, as a function of temperature. It permits the detection of differential temperature changes, from a programmed level of temperature.
The system consists of a copper sensor tube, stainless steel or Teflon (depending on the environmental conditions) of up to 130 meters long and its corresponding detector.
The detector includes: a pump that increases the pressure in the sensor tube, an electronic sensor that continuously measures the absolute pressure inside the tube and a microprocessor that performs the evaluation of data and activates the alarm, it filters the disturbing factors, such as climatic temperature variations and it detects anydamage that may arise in the sensor tube.
Characteristics:
- Supply voltage: 9 at 30 Vdc
- Range of environmental temperature: – 20 ºC to +70 ºC
- Range of temperature for sensor tube: -40 ºC to +300 ºC
- Dimensions: 134 x 250.5 x 160.5 mm.
- Level of protection of the cabinet: IP65• Weight: 1.6 Kg
Version of AECL-ADW detector for Ex-I areas, with identical characteristics
except:
- Dimensions: 450 x 210 x 205 mm. Weight: 13 Kg.
- Level of protection of the cabinet: II G2 EEx of IIC T6 or T5.
Version of the AECL-ADW detector for Ex II areas, with identical characteristics
except:
- Level of protection of the cabinet: IEEx nR IIC T6 IP 65.
- Dimensions: 160 x 160 x 90 mm.
External temperature sensor for the compensatory temperature. For levels above 200ºC it can be used a special version following the instructions from the manufacturer.
This module manages the individual alarms and the previous signals “Diff” and “Max” available by relay contacts. The relays can be programmed by a configuration’s software “ADW Config”.
Characteristics:
• Supply tension: 5 Vcc
• Max. Relay output load: 50 / 1 / 30 V DC/A/W
• Dimensions: 95x58x17mm
AECL-SW1. 1ADW control software
AECL-SW40. ADWNetSoft-40
AECL-SW100. ADWNetSoft-100
AECL-SW250. ADWNetSoft-250
Stainless steel tube, which includes special brackets for mounting tubes, connectorand end cap.
- Distance between each bracket: 0.8 m
- External diameter: 5 mm
- Internal diameter: 4 mm
- Length: 6 m
Copper tube with external diameter: 5 mm, internal diameter: 4 mm and length: 5.5 m
Flexible tube to connect the ADW unit and the copper tube.
- External diameter: 5 mm
- Internal diameter: 3 mm
- Length: 1 m
AECL-TSL. Copper spiral tube with length of 5.5 m.
Stainless steel coil exact sensor element 5m TU 5/4 St.
AECL-TSS. Copper spiral tube with length of 10m TU 5/4 Cu.
Tube out of teflon. It includes special brackets for mounting tubes, connector and endcap.
- Shipping Units: 100 meters, other sizes via “”special cut””
- Distance between each bracket:0.5 m
- External diameter: 6 mm• Internal diameter: 4 mm
- Length: 1 m
