Formed by: a printed circuit with terminals for its connection to the detector and contacts that detect the presence of water.
Mounted in an ABS cabinet of 40 x30 x15 mm.
Up to three can be connected in a single detector.
Archivos
Flood detector at 12 and 24 V
Formed by:
• Power supply with an encapsulated transformer.
• Electronic module with LEDs for alarms and service.Buzzer alarm,
encapsulated relay with free of tension output and an entry for water sensing probes.
Mounted in an ABS cabinet of 130x70x50 mm.
It needs external power at 12 or 24 V.
Maximum consumption at rest: 15mA.
Flood detector at 230 V
Formed by:
- Power supply with an encapsulated transformer.
- Electronic module with LEDs for alarms and service.Buzzer alarm, encapsulatedrelay with free of tension output and an entry for water sensing probes.
- Mounted in an ABS cabinet of 130x70x50 mm.
Carbon monoxide detector
Micro-processed equipment destined to detect carbon monoxide (CO) in residential zones. Easy to install and maintain, they are powered with 3 AAtype batteries included.
- It has a visual indication of alarm, audible indication > 85dB up to 3 meters, manual test button to check on the operation, fault signal in case of low battery or sensor fault.
- Size: 125mm Ø x 35 mm of height. Compliant with the EN 50194 norm.
Butane gas detector at 230V
They detect the presence of toxic gases.
Formed by
- A power supply with an encapsulated transformer, sensor, alarm
- Leds andservice Leds, buzzer alarm, sensitivity adjustment and an encapsulated relay withvoltage-free output.
- Mounted in an ABS cabinet of 130 x70 x50 mm.
- Power consumption: 5W.
GLP-Butano detector at 12V
Identical to the previous equipment, without power supply, are presented in the samehousing, while they need external power at 12 or 24 V.
- Maximum power consumption: 230 mA.
- Consumption at rest: 178 mA.
- Consumption in alarm: 228mA.
GLP-Butano detector at 24V
Identical to the previous equipment, without power supply, are presented in the samehousing, while they need external power at 12 or 24 V.
- Maximum power consumption: 230 mA.
- Consumption at rest: 178 mA.
- Consumption in alarm: 228mA.
Methane gas detector at 230V
They detect the presence of toxic gases.
Formed by
- A power supply with an encapsulated transformer, sensor, alarm
- Leds andservice Leds, buzzer alarm, sensitivity adjustment and an encapsulated relay withvoltage-free output.
- Mounted in an ABS cabinet of 130 x70 x50 mm.
- Power consumption: 5W.
Methane gas detector at 12V
They detect the presence of toxic gases.
- Formed by a power supply with an encapsulated transformer, sensor, alarm Leds andservice Leds, buzzer alarm, sensitivity adjustment and an encapsulated relay withvoltage-free output.
- Mounted in an ABS cabinet of 130 x70 x50 mm.
- Power consumption: 5W.
Methane gas detector at 24V
Identical to the previous equipment, without power supply, are presented in the samehousing, while they need external power at 12 or 24 V.
- Maximum power consumption: 230 mA.
- Consumption at rest: 178 mA.
- Consumption in alarm: 228mA.
Optical smoke detector with battery at 9 Vcc
Detector powered with a 9 V CC alkaline battery included.
- Optical smoke sensor, particularly effective in slow fires with and without flame.
- Audible indication of alarm > 85dB at 3 meters.
- Luminous indication of alarm.
- Manual test button of operations.
- Fault signal in case of dirt or damage to the sensor.
- Size: diameter: 102 mm, height: 40 mm.
- They meet the requirements of the EN14604 norm and are produced according to theISO9001:2000procedures.
- Adaptable to the socket surface AE/C5-ZA.
Optical smoke detector at 12V with a relay
Detector powered at 12 Vdc. Equipped with a normally open relay output.
- Optical smoke sensor, particularly effective in slow fires with and without flame.
- Audible indication of alarm > 85dB at 3 meters.
- Luminous indication of alarm.
- Manual test button for operations.
- Fault signal in case of dirt or damage to the sensor.
- Size: diameter: 102 mm, height:40 mm.
- They meet the requirements of the EN14604 norm and manufactured according to theISO9001:2000 procedures.
- Adaptable to the socket surface AE/C5-ZA.
Optical smoke detector at 230V AC with a relay-battery
Detector powered at 230 V AC, equipped with an included 9 VDC alkaline battery anda relay output normally open.
- Optical smoke sensor, particularly effective in slow fires with and without flame.
- Audibleindication of alarm > 85dB at 3 meters.
- Luminous indication of alarm.
- Manual test button of operations.
- Fault signal in caseof dirt or damage to the sensor.
- Size: diameter: 102 mm, height: 40 mm.
- They meet the requirements of the EN14604 norm and are produced according toprocedures ISO9001:2000.
- Adaptable to the socket surface AE/C5-ZA.
Smoke detector at 115Vca
Optical smoke detector provides inputs into alternating (AC) power (230 mAor 115V AC depending on model) and in continuous current 24V or 48V CC.
Equipped with sound and light indicators, relay with voltage free outputs for switching voltages and reset input by tension (range between 24 to 48 V DC) to reset the detector.
Assembled in an ABS cabinet of 165 mm Ø x 45 mm.
Smoke detector at 230 V
Optical smoke detector provides inputs into alternating (AC) power (230 mAor 115V AC depending on model) and in continuous current 24V or 48V CC.
Equipped with sound and light indicators, relay with voltage free outputs for switching voltages and reset input by tension (range between 24 to 48 V DC) to reset the detector.
Assembled in an ABS cabinet of 165 mm Ø x 45 mm.