AN/AC. Fuse adapter for the fixation of diffusers
AN/ACA Fuse adapter for the fixation of anti-drip diffusers
AN/ACR Thread adapter for the fixation of diffusers
AN/VA Thread adapter for the fixation of anti-drip diffusers
AN/CTM. Stainless T-type union for fuse adapter
AN/CTR. Stainless T-type union for thread adapter
AN/CCOM. Union elbow swivelled, adjustable for fuse diffuser
AN/CCOR. Union elbow swivelled, adjustable for threaded diffuser.
Manufactured in AISI 304 stainless steel and designed for a working pressure of 280bar. In the open diffusers, the discharge is produced directly, when the water reaches them. This diffuser is suitable for the wet systems or as a pre-action.
The flow of the diffusers is depending on the model of the nozzle and their number and the flow can be selected from 0.6 L/min up to 36 L/min, with a pressure of 120 bar.
All the diffusers for fixed installations have the same thread and the same system of sealing. For the fixation of the diffuser to the tube, an adapter is used between the accessory of the tube and the diffuser.
Open nebulizer head for the installation in dry piping, made out of AISI 304 stainless steel special for high pressure, with the nozzles mounted at 90º, 120° or 160º and a rangeof flow rates sufficient to cover a wide range of risks.
| 4 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA120T4 | de 1,6 a 20,4 |
| AN/CA90T4 | de 1,6 a 20,4 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA120T5 | de 2,0 a 25,5 |
| AN/CA90T5 | de 2,0 a 25,5 |
| 7 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA120T7 | de 2,8 a 35,7 |
| AN/CA90T7 | de 2,8 a 35,7 |
| 3 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA180T3 | de 1,2 a 15,3 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA180T5 | de 2,0 a 25,5 |
| 4 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA360T4 | de 1,6 a 20,4 |
| 6 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CA360T6 | de 2,4 a 30,6 |
| 3 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CAP90T3 | de 1,2 a 15,3 |
| AN/CAP120T3 | de 1,2 a 15,3 |
| 4 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CAP90T4 | de 1,6 a 20,4 |
| AN/CAP120T4 | de 1,6 a 20,4 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CAP90T5 | de 2 a 25,5 |
| AN/CAP120T5 | de 2 a 25,5 |
| REFERENCE | FLOW (L/min) |
| AN/CA1T | de 0,4 a 5,1 |
Manufactured in AISI 304 stainless steel and designed for a working pressure of 280bar. In the closed diffusers, a discharge is only produced when the shutter bulb (fuse ) reaches the temperature that it was calibrated for. This diffuser is suitable for the wetsystems or as a preaction.
The flow of the diffusers is depending on the model of the nozzle and their numberand the flow can be selected from 0.6 L/min up to 36 L/min, with a pressure of 120bar.
All the diffusers for fixed installations have the same thread and the same system of sealing. For the fixation of the diffuser to the tube, an adapter is used between the accessory of the tube and the diffuser.
| 5 NOZZLES | |
| REFERENCE | FLOW(L/min) |
| AN/CC90T5 | de 2 a 25,5 |
| AN/CC120T5 | de 2 a 25,5 |
| 7 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CC120T7 | de 2,8 a 35,7 |
| 3 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CC180T3 | de 1,2 a 15,3 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CC180T5 | de 2,0 a 25,5 |
| 5 NOZZLES | |
| REFERENCE | FLOW (L/min) |
| AN/CCP120T5 | de 2 a 25,5 |
