Referencia: AE/AX12S

Central alarm for mobile phones

Unit developed and manufactured by AGUILERA ELECTRONICA according to UNE EN54-2 norm to monitor fires, the technical signals and other parameterchanges that occur in mobile booths and similar premises.

Formed by:

  • Stabilized power supply, powered at 230 V with input protection, outputs at 27 and 12 V CC and battery charger.
  • Monitored loop that controls one area of fire detectors and fire switches, with signaling of: 1st level of fire, 2nd level, breakdown and service.
  • Loop monitored for the automatic fire extinction, programmable to release the extinguishing agent, with the 1st or 2nd level of fire.
  • Relays: about fire, supervised general breakdown, air conditioning pause and repetition of the external alarms, 1 and 14.
  • Control of 14 inputs, depending on the model, individually selectable via normally open or closed contact, which are transmitted by sub D37-pin connectors(2A relay outputs, voltage free by contact individually selectable, open or closed).
  • Dimensions: 375 x 280 x 130mm.
Referencia: AE/AX30S

Central with 30 inputs and 30 outputs

Unit developed and manufactured by AGUILERA ELECTRONICA according to UNE EN54-2 norm to monitor fires, the technical signals and other parameterchanges that occur in mobile booths and similar premises.

Formed by:

  • Stabilized power supply, powered at 230 V with input protection, outputs at 27 and 12 V CC and battery charger.
  • Monitored loop that controls one area of fire detectors and fire switches, with signaling of: 1st level of fire, 2nd level, breakdown and service.
  • Loop monitored for the automatic fire extinction, programmable to release the extinguishing agent, with the 1st or 2nd level of fire.
  • Relays: about fire, supervised general breakdown, air conditioning pause and repetition of the external alarms, 1 and 14.
  • Control of 30 inputs, depending on the model, individually selectable via normally open or closed contact, which are transmitted by sub D37-pin connectors(2A relay outputs, voltage free by contact individually selectable, open or closed).
  • Dimensions: 375 x 280 x 130mm.
Referencia: AE/AX30TRI

Central alarm for mobile phones

The central unit of alarms, AE/AX30TRI model is a central fire control unit and is repeating the external alarms for three different operators.

Basically it consists of:

  • Power supply and battery charger.
  • Fire detection loop.
  • Control circuit for automatic extinction that provides for a monitored output in orderto activate a solenoid valve.
  • Output by relay (24 V).
  • Output of 12 VDC (500 mA.) for various uses external to the central unit.
  • Control of 30 external alarm inputs, normally open or normally closed, selectableby a switch (outputs of the 30 alarms via potential-free relays, normally open orclosed, selectable by a selector switch).
  • For the first 14 outputs, plus fire alarm and general fault alarm it has three Sub-D connectors of 37 pins, to be used independently by each operator. This informationis repeated simultaneously on all three connectors.
  • For the remaining 16 outputs is available only one Sub-D connector of 37 pins.
  • Repetition through two switched relays of 2 A, with voltage free inputs1 and 30.
  • Control of one FIRE output and one GENERAL FAULT output, both normally closed, through the first 3 Sub-D connectors of 37 pins.
  • 2 A voltage free relays switched for:
    • Fire alarm.
    • General fault alarm (normally energized).
    • Ventilation stop, selectable with fire level 1 or level 2.
    • Optical and audible signals, as well as the necessary controls for the managementof the installation.
Referencia: AE/C5-2M

Control panel for 2 zones metallic cabinet

Metallic micro-processed central cabinets, according to EN-54, parts 2 and 4.

They have:

  • 2 conventional detection loops with an active end of line.
  • Control to access levels by key.
  • 2 monitored exits for evacuation.
  • Fire relay (general alarm).
  • Auxiliary output of 24 V CC.
  • 6-key keyboard for proper handling.
  • Test zones mode.
  • Separate power on/off, for detection zones and evacuation zones.
  • 10 independent LEDs for alarm indications.
  • They need one unique 12V/7Ah battery.
  • They perform continuous monitoring of the entire system.
  • Dimensions AE/C5-2M: 200 x 290 x 80. Weight: 2.8 Kg.
Referencia: AE/C5-2P

Control panel for 2 zones ABS cabinet

Micro-processed central cabinets, nicely designed, manufactured in ABS, accordingto EN54, parts 2 and 4.

They have:

  • 2 conventional detection loops with an active end of line.
  • Control to access levels by key.
  • 2 monitored exits for evacuation.
  • Fire relay (general alarm).
  • General Fault Relay.
  • Auxiliary output of 24 V CC.
  • 6-key keyboard for proper handling.
  • “”Test monitored areas”” mode.
  • They need one unique 12V / 7Ah battery.
  • They perform continuous monitoring of the entire system.
  • Dimensions: 340 x 290 x 100. Weight: 2.5 Kg.
Referencia: AE/C5-8-16

Control panel of 8, 12 and 16 zones modular cabinet

Modular, micro-processed, central unit manufactured according to EN 54-2 and EN 54-4.

  • Modular capacity between 8, 12 and 16 zones of conventional detection with anactive end of line.
  • Monitored exits for evacuation.
  • Fault and fire detector relay.
  • Test monitored areas mode.
  • Control keys and status indicating LEDs.
  • Capacity for a 12V /18Ah battery.
  • Dimensions: 462 X 345 X 120.

The 12-zone control panel can be requested by ordering an AE/C5-8-16 central unit and a 4-zone AE/C5-MZ4 card.

The 16-zone central control unit is requested by ordering an AE/C5-8-16 central unit and two 4-zone AE/C5-MZ4 cards.

Referencia: AE/C5-8P

Control panel for 8 zones ABS cabinet

De similares características que la central AE/C5-4P pero con 8 zonas de detección convencional. Dispone de selección de zona de pulsadores o zona de detectores, retardo de las salidas y conexión al módulo de relés AE/C5-R8. Dimensiones 340X290X100. Permite su control remoto mediante el módulo AE/C5-IDC y el software de telecontrol AGE44.

Referencia: AE/C5-R8

Module of 8 output relays

Module of 8 remote relays for the AE/C5-8-16 central unit. It has free contacts Normally Open or Normally Closed, individually selectable through a jumper.The relays are individually activated in case of zone alarm.

The module requires external 24 V CC power supply. The connection is via 4 or 6 wires (if they feed from the central panel).

  • Maximum distance from the central unit: 1000 m.
  • Maximum number of modules: 2.
Referencia: AE/PX2

Extinguishing control panel

Developed and manufactured by Aguilera Electronica under EN12094-1.

Characteristics:

  • 2 monitored detection zones.
  • Operating mode, programmable as:
    • Double detection:Two alarms in one zone.
    • Crossed detection: One alarm in every zone.
    • Mixed: Two alarms in the panel.
  • Monitored detection zone for trigger extinction button.
  • Monitored entry zone for extinction pause button.
  • Buttons for extinguishing the fire and pausing extinction built into the panel.
  • 2 independent monitored inputs for pressure monitoring or control of weighingand flow control.
  • Monitored output for evacuation and for fire extinguishing poster.
  • Mode selection key: automatic, manual or unarmed.
  • Display indicating the time remaining for the discharge.
  • Output time before extinction programmable between 0 and 60 seconds.
  • Optional relays in order to repeat the central unit states.
  • Dimensions: 320 x 272 x 125 mm.• It can receive 2 batteries of 12V/7Ah.