Indirect high pressure system for CO2

High pressure bottles made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -10ºC to +60ºC. Engraving and painting according to the regulations.

Equipped with:

  • Main valve, made in forged brass. Provided with safety disk. Provided with a 3-position valve, open, shut and pressurization of the sensor tube with the same agent in the bottle. The valve state is monitored through a N.A. contact.
  • Pressure switch incorporated with usually open output.
  • A connection for Aedetec sensor tube is included.
  • Trip solenoid (power supply 24V and consumption of 500mA).
  • Attachment fitting.
  • Flange and protection cap.
  • 1 output for the sensor tube.
REFERENCE CAP.(L) MAX.LOAD(Kg) DIMENSIONS LOAD(Kg)
AEX/ADTICO4 4,7 3,3 0,24×0,14×0,50 8,6
AEX/ADTICO6 6,7 4,5 0,24×0,14×0,65 10,3
AEX/ADTICO13 13,4 9 0,24×0,14×1,15 15,5
AEX/ADTICO26 26,8 18 0,33×0,23×1,02 48
AEX/ADTICO40 40,2 27 0,33×0,23×1,32 52
Referencia: AEX/ADTDC

Direct high pressure system for CO2

High pressure bottles made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -20ºC to +50ºC. Engraving and painting according to the regulations. Equipped with:

  • Main valve, made in forged brass with stainless steel piston and shaft without welding. Provided with safety disk. Ball valve for opening/shutting the output with monitoring of a state (usually open/common).
  • Pressure switch incorporated with output usually open
  • A connection for Aedetec sensor tube is provided
  • Trip solenoid (power supply 24V and consumption of 500mA).
  • Attachment fitting.
  • Flange and protection cap.
  • 1 Sensor tube outlet.
REFERENCE CAP.(L) MAX.LOAD(Kg) DIMENSIONS LOAD(Kg )
AEX/ADTDCO4 4,7 3,3 0,24×0,14×0,50 8,6
AEX/ADTDCO6 6,7 4,5 0,24×0,14×0,65 10,3
AEX/ADTDCO13 13,4 9 0,24×0,14×1,15 15,5
Referencia: AEX/ADTDH

Direct high pressure system for HFC 227ea and Novec 1230

High pressure bottles made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -10ºC to +60ºC. Engraving and painting according to the regulations.

Equipped with:

  • Main valve, made in forged brass with stainless steel piston and shaft without welding. Provided with safety disk. Ball valve for opening/shutting the output with monitoring of a state (usually open/common).
  • Pressure switch incorporated with usually open output.
  • A connection for Aedetec sensor tube is included.
  • Trip solenoid (power supply 24V and consumption of 500mA).
  • Attachment fitting.
  • Flange and protection cap.
  • 1 output for the sensor tube.
REFERENCE CAP.(L) MAX.LOAD (Kg) DIMENSIONS TARE(Kg )
AEX/ADTDH4 4,7 5,7 0,24×0,14×0,50 8,6
AEX/ADTDH6 6,7 7,7 0,24×0,14×0,65 10,3
AEX/ADTDH13 13,4 15,4 0,24×0,14×1,15 15,5
AEX/ADTDH26 26,8 30,8 0,33×0,23×1,02 48
AEX/ADTDH40 40,2 46,2 0,33×0,23×1,32 52
Referencia: AEX/ADTIH

Indirect high pressure system for HFC 227ea and Novec 1230

High pressure bottles made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -10ºC to +60ºC. Engraving and painting according to the regulations.

Equipped with:

  • Main valve, made in forged brass. Provided with safety disk. Provided with a 3-position valve, open, shut and pressurization of the sensor tube with the same agent in the bottle. The valve state is monitored through a N.A. contact.
  • Pressure switch incorporated with usually open output.
  • A connection for Aedetec sensor tube is included. Trip solenoid (power supply 24V and consumption of 500mA).
  • Attachment fitting.
  • Flange and protection cap.
  • 1 output for the sensor tube.
REFERENCE CAP.(L) MAX.LOAD(Kg) DIMENSIONS LOAD(Kg)
AEX/ADTIH4 4,7 5,7 0,24×0,14×0,50 8,6
AEX/ADTIH6 6,7 7,7 0,24×0,14×0,65 10,3
AEX/ADTIH13 13,4 15,4 0,24×0,14×1,15 15,5
AEX/ADTIH26 26,8 30,8 0,33×0,23×1,02 48
AEX/ADTIH40 40,2 46,2 0,33×0,23×1,32 52
Referencia: AEX/ADTDLx

Direct low pressure system for HFC227 and Novec 1230

Low pressure bottles, made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -10ºC to +60ºC. Engraving and painting according to the regulations.

Equipped with:

  • Main valve, made in forged brass with stainless steel piston and shaft without welding. Provided with safety disk. Ball valve for opening/shutting the output with monitoring of a state (usually open/common).
  • Gauge incorporated.
  • Two outputs for Aedetec sensor tube incorporated.
  • Trip solenoid (power supply 24V and consumption of 500mA).
  • Attachment fitting.
  • Flange and protection cap.
  • 1 Sensor tube outlet.
REFERENCE CAP.(L) MAX.LOAD(Kg) DIMENSIONS LOAD(Kg)
AEX/ADTDL4 4,7 5,7 0,24×0,14×0,50 8,6
AEX/ADTDL6 6,7 7,7 0,24×0,14×0,65 10,3
AEX/ADTDL13 13,4 15,4 0,24×0,14×1,15 15,5
AEX/ADTDL26 26,8 30,8 0,33×0,23×1,02 48
AEX/ADTDL40 40,2 46,2 0,33×0,23×1,32 52
Referencia: AEX/ADTIL

Indirect low pressure system for HFC227 and Novec 1230

Low pressure bottles, made of thermally-treated alloy steel without welding (according to instruction MIE AP7 for pressure devices and European Directive 84/525/CEE). Working pressure 60 bar, test pressure 250 bar, operating temperature from -10ºC to +60ºC. Engraving and painting according to the regulations.

Equipped with:

  • Main valve, made in forged brass with stainless steel piston and shaft without welding. Provided with safety disk. Ball valve for opening/shutting the output with monitoring of a state (usually open/common).
  • Gauge incorporated.
  • Two outputs for Aedetec sensor tube incorporated Trip solenoid (power supply 24V and consumption of 500mA).
  • Attachment fitting.
  • Flange and protection cap.
  • 1 Sensor tube outlet.
REFERENCE CAP.(L) MAX.LOAD(Kg) DIMENSIONS LOAD(Kg)
AEX/ADTIL4 4,7 5,7 0,24×0,14×0,50 8,6
AEX/ADTIL6 6,7 7,7 0,24×0,14×0,65 10,3
AEX/ADTIL13 13,4 15,4 0,24×0,14×1,15 15,5
AEX/ADTIL26 26,8 30,8 0,33×0,23×1,02 48
AEX/ADTIL40 40,2 46,2 0,33×0,23×1,32 52
Referencia: AEX/ADT

Pushbuttons and drives for indirect systems

AEX/ADTPM. Pushbutton with gauge
“Pushbutton with gauge incorporated for triggering of indirect systems.
Provided with security seal”

AEX/ADTPMC. Pushbutton with gauge in box
“Pushbutton with gauge incorporated housed in a metal box for triggering indirect systems.
Provided with security seal.”

AEX/ADTEM. Trip electro-valve with gauge
Trip electro-valve for indirect systems. Provided with a gauge.

Referencia: AEX/ADTTSR

Sensor Tube

AEX/ADTTSR. Aedetec Sensor Tube
Aedetec sensor tube has been specially designed for being used in automatic systems for fire fighting

AEX/ADTTSRX. Aedetec Sensor Tube (100m)
Aedetec sensor tube has been specially designed for being used in automatic systems for fire fighting